ANYCUBIC LCD UV 405nm Rapid Resin for 3D Printer-500ml/ 500g-Bottle Random Grey 1L POT061

Color:Grey 1L Parameter information: Size:1Kg/1L Main material: resin monomer & photoinitiator Exposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s Resin parameters: Solidify wavelength:405nm Hardness (D): 79.0 Viscosity (25 ° C): 552.0 mpa.s Liquid density: 1.100 g / cm3 Solid density: 1.184 g / cm3 Flexural strength:23.4 Mpa Tensile strength: 23.4 Mpa Elongation frequency：14.2 % Shelf life: 1 year Features: UV light will solidify the resin Precautions: 1. Storage method Keep away from light seals at room temperature.( Sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected as long as it is not UV light) It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin. 2.Usage: Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight Wear gloves before use to avoid direct contact with the skin and keep the room ventilated Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention. Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better). Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).